|
|
Embedded Linux board (OS: Linux) |
|
NittsuSystem's reference design for the Intel@XScale microarchitecture family is a single board computer that allows software development. This board has various interfaces that are USB port, LAN port and touch screen panel etc, and has Linux as a standard OS. By using this board, the cost cut of working time is realizable rather than it develops a control board of same class. By having Linux,
it becomes possible to realize highly efficient application easily.
|
|
|
◆ARM CPU◆
|
|
◆Large scale RAM◆
|
|
◆Linux◆
|
◆10/100BASE-T◆
|
◆Various Reader interface ◆
Magnetic card reader, Fingerprint authentication reader、IC card reader
|
◆Color LCD touch screen panel◆
This has two kinds of sizes, 5.7 inches and 12.1 inches, (refer to left figure).
|
|
This board is Single Board Computer
which used IntelPXA255, and has the
various wide use interfaces.
|
|
【Reference】
◆WLAN communication board
◆USB2.0 interface board
◆LCD touch panel control board
◆Card Reader control board
The following are supported.
- Magnetic card reader
- Fingerprint authentication reader
- IC card reader
|
|
Instances are check here
|
|
Linux software development package
|
Specification
|
Contents | Specification | Note
|
|
CPUMovement frequency | Intel Xscale PXA255 |
|
|
SDRAM | 64MByte |
|
|
FLASH R0M | 32MByte |
|
|
Ethernet | 10/100Base-TX |
|
|
Serial Port | FullUART×1、BTUART×2 |
|
|
JTAG Port | For ICE interface |
|
|
AC97 | |
|
|
LCD・Touch Panel | 5.7inch_STN(QVGA)、12.1inch_TFT(XGA) |
|
|
Segment LCD | |
|
|
SD CARD | |
|
|
Electric wave clock | |
|
|
Power supply | |
|
※The specification of the indicated product may be changed without a preliminary announcement.
| Contents |
Specification |
Note |
|
OS | Linux2.4.18 Kernel |
|
|
BootLoader | Red Hat |
|
|
Device Driver | | Eshernet |
|
|
Audio Codec |
|
|
Frame Buffer | |
| Touch Panel screen |
|
|
PCMCIA | |
|
UART |
|
|
RTC | |
|
FLASH Memory | |
| Browser |
|
|
| E-Mail |
|
|
|
JTAG | |
|
|
File System | JFFS2 |
|
|
GUI | Kdrive、IceWM |
|
| Form measure |
Main board 164mm*86mm |
|
| Touch panel board 86mm*25mm |
|
| USB connecter board 86mm*25mm* When
using a switching AC power supply, use a power supply board (86mmx40mm). |
|
|
|
